TAKASAGO HX-S-01000-12G2, Instruction Manual

Page: 158 / 240

Controlling with External Analog & Contact Signals
158
Isolated Analog Output Monitor
* This function can be set for isolation-option-featured type "model name with I" only.
This can produce the DC voltage, which is proportional to the output voltage and output current and is insulated from
the output terminal. .
Use when wishing to surveillance the output with an external meter or recorder.
Outputs a "0~10V" DC for output voltage/currents of "0 to rated output".
Please use an input impedance of a 10kΩ or more for the external meter.
Isolated, Output Voltage Monitor
The accuracy for the output voltage monitor is 0.5% ± 10mV.
Connecting
Connect the meter or the recorder between No. 1 and 2 of the isolated control connector (accessory).
V
-
+
Twisted-Pair Wire
Insulation Control Connector
1
2
Isolated, Output Current Monitor
The accuracy for the output current monitor is 1.0% ± 10mV.
Connecting
Connect the meter or the recorder between No. 3 and 2 of the isolated control connector (accessory).
V
-
+
Twisted-Pair Wire
Insulation Control Connector
3
2
 Output current wave forms cannot be observed by the
current monitor.
！
CAUTION