TAKASAGO HX-S-01000-12G2, Instruction Manual

Page: 40 / 240

Basic Usage
40
Setting Output ON/OFF Toggle Mode
Output status at power supply is turned on (POWERON) can be changed.
If this is set to 1 or 2 and the power supply is turned on (POWERON), output will begin even if the OUTPUT key is not
pressed.
Setting Procedures
Press The Function “FUNC.” key.
The FUNC. lamp will light.
The Setting Item Number will be displayed in the top Number
Display and the parameter will be displayed in the bottom
Number Display.
Select Item number 51 with the VOLTAGE dial.
Set Parameter to 0 ,1 or 2 with the CURRENT dial.
Parameter = 0:
Output is OFF (COLD START) after power is turned on,
Pressing the OUTPUT key will toggle it ON/OFF.
Parameter = 1:
Output turns ON approximately 8 seconds after power is turned
on. (HOT START)
Parameter = 2:
Output turns ON approximately 8 seconds after power is turned
on.
(HOT START MODE 2)
However, the output status is OFF when recovered from ALM
occurrence or TRIP operation. If the OUTPUT key is pressed,
the output status becomes ON.
Press the FUNC. key again to finalize settings.