TAKASAGO HX-S-01000-12G2, Instruction Manual

Page: 179 / 240

Calibration
179
7. Set the external resistance to 10kΩ and the
constant current setting value to [ yA ] and set
the output to ON.
30-200 30-400 60-100 60-200
[yA] 1.0A 1.0A 1.0A 1.0A
500-12 500-24 1000-6 1000-12
[yA] 0.10A 0.10A 0.010A 0.10A
120-50 120-100 400-15 400-30
[yA] 0.10A 1.0A 0.10A 0.10A
On how to set, refer to Output Voltage Control with
External Resistance (B).(page
147)
8. Press the FUNC. key.
9. Turn the VOLTAGE dial to display the setting item
number 29 in the Number Display (voltage).
* At that time, "C" or "F" is displayed in the Number
Display (current).
C: Coarse adjustment
F: Fine adjustment
10. Adjust so that the output voltage becomes [ xV ]
with the CURRENT dial.
30-200 30-400 60-100 60-200
[xV] 30.000V 30.000V 60.000V 60.000V
500-12 500-24 1000-6 1000-12
[xV] 500.00V 500.00V 1000.0V 1000.0V
120-50 120-100 400-15 400-30
[xV] 120.00V 120.00V 400.00V 400.00V
* Pressing the CURRENT dial switches the
adjustment between "C" (coarse adjustment) and
"F" (fine adjustment).
11. Press the FUNC. key to settle the full-scale
calibration value of output voltage control with
external resistance (B).
12. This completes offset/full-scale calibration of
output voltage control with external resistance (B).