Taiden HCS-4100MA/50, Installation And Operating Manual

Page: 94 / 317

79
Pressing the microphone On/Off key cannot
activate the microphone until one of the activated
microphones is switched off.
A camera can focus an activated microphone
automatically (camera position preset by application
software). Speaker’s video can be exported to and
displayed on large screen(s).
4. Voting
Voting can be originated by the chairman unit (only for
3 keys voting), or by TAIDEN conference management
system software.

The voting button indicating lights of the congress
unit start to blink, the delegate can press the voting
button to vote;

For “First key-press valid” voting, the delegate can
vote only once;

For “Last key-press valid” voting, the delegate can
change his/her vote, and the last voted key will be
valid;

The voting originated by the chairman unit only
supports “Last key-press valid”.
5. Channel selection

When the CMU is connected to interpreter unit(s),
simultaneous interpretation function will work. To
use the channel selector, an earphone must be
plugged in. When the earphone is plugged, the
LCD will display the simultaneous interpretation
channel number and language name. The
delegate can select a suitable language to listen to
by means of the channel selector.

When the earphone is pulled out, the LCD will not
display the simultaneous interpretation information
anymore.
6. Volume control

The volume of the built-in loudspeaker can be
adjusted by the master volume control knob on the
main unit;

When the earphone is plugged, its volume can be
adjusted by the earphone volume control of the
unit.
7. LCD display
After sign-in, the following interface will be displayed on
the LCD:
A. “Message” (key “1”)

Use this key to read a message. When a PC is
connected, the operator can edit and send a
message to congress unit(s);

On receipt of a message, a ring tone will be
emitted by the built-in loudspeaker and “You have
got a new message” will be displayed on its LCD
and the indicating light of key “5” will blink. Press
key “5” to read the corresponding message;

At most 4 messages can be stored in the congress
unit. In case of more incoming messages, the first
received message will be overlapped.
B. “Microphone” (key “3”)
Use this key to display microphone information,
including: active microphone number (including
chairman, delegate and VIP), request amount:
C. “LogOut” (key “4”)
It is used under IC-Card sign-in mode or/and PIN code
sign-in mode.
Note:

“Voice” speaking mode: the chairman unit
and the VIP unit count in the active
microphone number limitation (1/2/3/4), if the
active microphone number limitation reached,
the microphones of the chairman unit and the
VIP unit cannot be turned on;

Other speaking modes: the chairman unit
and the VIP unit do not count in the active
microphone number limitation (1/2/3/4); at
most 6 microphones can be activated at the
same time in a system.