Taiden HCS-4100MA/50, Installation And Operating Manual

Page: 191 / 317

176
3.13 HCS-4341/50 series congress unit
3.13.1 Functions and indications
3.13.1.1 HCS-4341/50 series congress unit
Front of HCS-4341CB/50
boundary chairman unit
Front of HCS-4341DB/50
boundary delegate unit
Bottom of HCS-4341B/50 HCS-4341HD/50 flush-mounted
delegate unit
Figure 3.13.1 HCS-4341/50 series congress units
Figure 3.13.1:
1. Priority key with indicating light (for the
chairman unit only):

According to the priority mode configuration on the
main unit:
◊
If configured as “All mute”, all active delegate
microphones (except VIP units) will be muted
temporarily when this key is pressed and they
will resume when the key is released;
◊
If configured as “All off”, all active delegate
microphones (except VIP units) will be switched
off when this key is pressed. Under “Open” and
“Apply” mode, pressing this key will clear the
request list (deny all delegates’ requests to
speak);

If the chairman microphone is not active, pressing
this key will activate it.
2. Microphone On/Off key with indicating light (for
the chairman unit)
Microphone/request key with indicating light (for
the delegate unit):

Chairman unit: press this key to activate/deactivate
the microphone;

Delegate unit: press this key to activate/deactivate
the microphone or request/cancel
request to speak.
Work state Indicating light
Microphone On Red (on)
Speaking time limit Red (flash)
3. Cat.5 cable with standard RJ45 plug, connecting
to “Mic.” socket of multi-function connector
4. Bass cut switch (switch down is on)

200 Hz, -3 dB
5. Treble cut switch (switch down is on)

8 kHz, -3 dB
6. Cable with a 6P mini DIN plug to connect to
“Handheld Mic.” socket of multi-function
connector