Taiden HCS-4100MA/50, Installation And Operating Manual

Page: 26 / 317

11
2.1 Fully Digital Congress System Main Unit
2.1.1 Functions and instructions
2.1.1.1 Front panel
Figure 2.1.1 Front panel of HCS-4100M/50 CMU
Figure 2.1.1
1. Power light
a. Switches to red in standby mode;
b. Switches to blue when operating.
2. “STANDBY” button
3. “MENU” button
a. The LCD displays the initial user interface: press
this button to enter the LCD set-up menu;
b. The LCD displays the set-up user interface: press
this button to select the highlighted item or enter
the submenu;
c. The LCD displays the network configuration: press
this button to select/deselect the numeric value.
4. “

” (Left) button

In standby state, press this button to display
current input audio spectrum;

In the set-up interface of the LCD menu, press this
button to cursor to the left.
5. “

” (Right) button

In standby state, press this button to select the
number of maximum active microphones;

In the set-up interface of the LCD menu, press this
button to cursor to the right.
6. “EXIT” button

In standby state, press this button to select the
operation mode of the microphones;

In the set-up interface of the LCD menu, press this
button to exit current menu.
7. LINE IN 1 Vol.

Electric level adjustment knob
8. A type USB interface

To plug-in a USB stick.
9. Mini USB interface

For connecting to PC.
10. “MASTER VOLUME”

Knob to adjust the master volume of the floor
audio channel for the congress units.
11. Monitoring earphone interface

Earphone jack (Ø 3.5 mm).
12. Microphone operation mode indicator (“OPEN”
/ “ O V ER R I D E” / “ VO I C E ” / “ A PP LY ” / “ PT T. ” )

Corresponding indicator lights up according to
selected mode.
13. Menu display

256×32 LCD displays main unit status and
configuration menu.