Taiden HCS-4100MA/50, Installation And Operating Manual

Page: 42 / 317

27
a). Press the “

/

” button to select monitor channel;
b). Press the “MENU” button to save and return to the
upper level menu.

Volume
Adjust monitoring headphone volume, range: -30 dB -
0 dB.
a). Press the “

/

” button to adjust the volume (press
and hold the “

/

” button will adjust numeric value
quickly);
b). Press the “MENU” button to save and return to the
upper level menu.
13. Ring Setting
Select ring tone on/off when request to speak, chairman
priority button pressed, speech timing or request to
intercom.
a). Press the “

/

” button to select ring on/off;
b). Press the “MENU” button to save and return to the
upper level menu.
14. Priority Setting
Select enable/disable chairman priority button.
a). Press the “

/

” button to select enable/disable
chairman priority button;

If “ No ” is selected, press the “MENU” button to
confirm and return to the upper level menu;

If “ Yes ” is selected, press the “MENU” button to
confirm and go to step b);
b). Press the “

/

” button to select priority mode
between “All Mute” and “All Off”;

“ All Mute ”: when chairman presses and holds
the priority button, all active delegate
microphones (except VIP units) will mute
temporarily; when chairman releases the priority
button, all temporarily muted microphones will
resume;

“ All Off ”: when chairman presses the priority
button, all active delegate microphones (except
VIP units) will be deactivated.
c). Press the “MENU” button to save and return to the
upper level menu.
15. Voice Mode Setting
"Voice Mode Setting” includes two submenus:
"Voice Sensitivity”
"Auto Off Time”

Voice Sensitivity
Set microphone sensitivity under voice mode. Higher
sensitivity means a lower voice can activate the
microphone.
a). Press the “

/

” button to set microphone
sensitivity;
b). Press the “MENU” button to save and return to the
upper level menu.

Auto Off Time
If the speaker does not speak for a certain time under
“Voice” mode, the microphone will be deactivated
automatically.