Taiden HCS-4100MA/50, Installation And Operating Manual

Page: 211 / 317

196
congress unit back to the CMU or the EMU with a
CBL6PP extension cable (the cable features a 6P-DIN
male connector at each end). In HCS-4100/50 series
system, the congress main unit can realize a “Closed
Loop - Daisy Chain” connection, but only one –
extension units do not offer this feature.
Figure 3.14.16 “Closed Loop - Daisy Chain” connection
between the CMU and multi-function connectors
3.14.3.2 Connections between multi-function
connectors
All HCS-4340/50 multi-function connectors are
daisy-chained easily and conveniently by dedicated
6P-DIN cables.
When connecting to another congress unit, just
connect the 6P-DIN standard male connector on the
2.1-meter cable of the next multi-function connector to
the 6P-DIN standard female socket of this
multi-function connector.
Figure 3.14.17 “Daisy-chain” connection between
HCS-4340/50 series multi-function connectors
3.14.3.3 Multi-function connector connected to
the HCS-4841N/42N/43N series,
HCS-4841U/50 series and
HCS-4841UA/50 series congress unit
The HCS-4841N/42N/43N series, HCS-4841U/50
series and HCS-4841UA/50 series congress unit is
equipped with a standard RJ45 socket. When
connecting to the multi-function connector, just use
Cat.5 cable with standard RJ45 plugs to connect the
RJ45 socket of the congress unit into the
corresponding RJ45 socket of the multi-function
connector (figure 3.14.18).
3.14.3.4 External earphone
An external earphone can be connected to the
earphone jack of HCS-4842N/50 and HCS-4842NA/50
channel selector. Its volume can be adjusted by the
earphone volume control button. The external
earphone shall have Ø 3.5 mm plug, as the following
figure:
Functions and indications:
1 Left stereo channel signal
2 Right stereo channel signal
3 Power ground/Shield