Taiden HCS-4100MA/50, Installation And Operating Manual

Page: 127 / 317

112
a. The microphone will be activated when the
microphone On/Off key is pressed and held, the
speaker can give his/her speech;
b. The microphone will be deactivated when the
microphone On/Off key is released.

Active microphone number limitation (1/2/3/4)
reached :
Pressing the microphone On/Off key cannot
activate the microphone until one of the activated
microphones is switched off.
A camera can focus an activated microphone
automatically (camera position preset by application
software). Speaker’s video can be exported to and
displayed on large screen(s).
4. Voting (HCS-4371SD/50 does not have this
function)
Voting can be originated by the chairman unit (only for
3 keys voting), or by TAIDEN conference management
system software.

The voting button indicating lights of the congress
unit start to blink, the delegate can press the voting
button to vote;

For “First key-press valid” voting, the delegate can
vote only once;

For “Last key-press valid” voting, the delegate can
change his/her vote, and the last voted key will be
valid;

The voting originated by the chairman unit only
supports “Last key-press valid”.
5. Channel selection (HCS-4371SD/50 and
HCS-4382SD/50 do not have this function)

When the CMU is connected to interpreter unit(s),
simultaneous interpretation function will work and
the channel selector will be activated. To use the
channel selector, an earphone must be plugged in.
When the earphone is plugged, the backlight of the
channel select display lights up. The delegate can
select a suitable language to listen to by means of
the channel selector;

When the earphone is pulled out, the backlight of
the channel select display will extinguish.
6. Volume control

The volume of the built-in loudspeaker can be
adjusted by the master volume control knob on the
main unit;

When the earphone is plugged, its volume can be
adjusted by the earphone volume control of the
unit.
7. LCD display (HCS-4370SDWE/50 and
HCS-4371SD/50 do not have this function)
After sign-in, the following interface will be displayed on
the LCD:
A. “Message” (key “1”)

Use this key to read a message. When a PC is
connected, the operator can edit and send a
message to congress unit(s).

On receipt of a message, a ring tone will be
emitted by the built-in loudspeaker and “You have
got a new message” will be displayed on its LCD
and the indicating light of key “5” will blink. Press
key “5” to read the corresponding message.

At most 4 messages can be stored in the congress
unit. In case of more incoming messages, the first
received message will be overlapped.
Note:

“Voice” speaking mode: the chairman unit
and the VIP unit count in the active
microphone number limitation (1/2/3/4), if the
active microphone number limitation reached,
the microphones of the chairman unit and the
VIP unit cannot be turned on;

Other speaking modes: the chairman unit
and the VIP unit do not count in the active
microphone number limitation (1/2/3/4); at
most 6 microphones can be activated at the
same time in a system.