Taiden HCS-4100MA/50, Installation And Operating Manual

Page: 219 / 317

204
3.15.2 Installation
3.15.2.1 Flush-mounted installation of
HCS-4368/50 series voting unit
a. Cut a hole in the table according to the dimensions
in figure 3.15.2;
b. Put the congress unit into the hole and drill four Ø
2 mm holes with 10 mm depth at P1, P2, P3 and
P4;
c. Screw at P1, P2, P3 and P4.
Figure 3.15.2 Fixing hole positioning diagram of
HCS-4368/50 series flush-mounted voting unit (unit: mm)
Figure 3.15.3 Dimension diagram of HCS-4368/50
series flush-mounted voting unit (unit: mm)
3.15.2.2 Installation of the protective cover of
HCS-4368/50 series flush-mounted
voting unit
If not in use for a long time, just pull out the microphone
and hook up the magnetic protective cover:
Figure 3.15.4 Installation diagram of the protective cover
of HCS-4368/50 series flush-mounted voting unit
3.15.2.3 Disassembly of the protective cover of
HCS-4368/50 series flush-mounted
voting unit
A vacuum cup is needed to dismount the protective
cover. Seize the protective cover with the vacuum cup
and pull it from the discussion unit.
Figure 3.15.5 Dismounting the protective cover of
HCS-4368/50 series flush-mounted voting unit