Taiden HCS-4100MA/50, Installation And Operating Manual

Page: 226 / 317

211
3.16.3 Connection
3.16.3.1 Connection between nameplate and
congress unit
The HCS-1080 nameplate is equipped with a cable
with a Mini 6 Pin Din male connector. When connecting
to the congress unit, just connect the Mini 6 Pin Din
male connector to the Mini 6 Pin Din female connector
on the cable of the congress unit. See figure 3.16.6.
3.16.3.2 Connection between nameplate and
HCS-1080T
The HCS-1080 nameplate is equipped with a cable
with a Mini 6 Pin Din male connector. When connecting
to HCS-1080T, just connect the Mini 6 Pin Din male
connector to the Mini 6 Pin Din female socket on the
HCS-1080T. One HCS-1080T has 4 sockets to
connect HCS-1080. See figure 3.16.7.
3.16.3.3 Connecting HCS-1080T to the CMU or
the EMU
The HCS-1080T nameplate adaptor is equipped with a
1.5-meter 6P-DIN cable with a standard male
connector. To connect to the HCS-4100/50 CMU or the
HCS-8300 EMU, just connect the male connector of
the first nameplate adaptor to the output of the main
unit.
If there is a long distance between the nameplate
adaptor and the CMU (EMU), CBL6PS extension cable
can be used. One end is equipped with a 6P-DIN male
connector and the opposite end with a female
connector. Just connect the female connector of the
cable to the next nameplate adaptor, and connect the
male connector to the output of the main unit.
Figure 3.16.3 HCS-1080T connected to the CMU/EMU
Neither the replacement of nameplate adaptors nor
cable faults between nameplate adaptors will affect the
other units if “Closed Loop - Daisy Chain” connection
topology is selected. “Closed Loop - Daisy Chain”
connection, achieved by closing the loop of the
daisy-chained units, increases system reliability. To
obtain “Closed Loop - Daisy Chain” connection, just
connect the last nameplate adaptor back to the CMU or
the EMU with a CBL6PP extension cable (the cable
features a 6P-DIN male connector at each end). In
HCS-4100/50 series system, the congress main unit
can realize a “Closed Loop - Daisy Chain” connection,
but only one – extension units do not offer this feature.
Figure 3.16.4 “Closed Loop - Daisy Chain” connection
between the CMU and HCS-1080T
3.16.3.4 Connection between HCS-1080T
nameplate adaptors
All HCS-1080T nameplate adaptors are daisy-chained
easily and conveniently by dedicated 6P-DIN cables.
When connecting to another nameplate adaptor, just
connect the 6P-DIN standard female connector on the
0.6-meter cable of the unit to the 6P-DIN standard male
connector on the1.5-meter cable of the next unit.