Tadiran Telecom TGW4 SERIES User Configuration Manual Download Page 6

Page: 6 / 142

User Configuration Manual TGW4/8 Gateway Series for Aeonix

Tadiran Telecom (TTL) L.P.

2.7.1 System..................................................................................................................................................... 50

2.7.2 Auto Provision [Future Option, Check Availability] ................................................................................... 52

2.7.3 Management System Type ...................................................................................................................... 53

2.7.4 Security Configuration ............................................................................................................................. 55

2.7.5 White list for Accessing Web and Telnet ................................................................................................. 56

2.7.6 Media Stream .......................................................................................................................................... 57

2.7.7 SIP Related Configuration ....................................................................................................................... 58

2.7.8 RADIUS (TGW8-2G and TGW8S-2G only) [

Not Applicable] .................................................................. 62

2.7.9 Encryption [Not Applicable] ...................................................................................................................... 62

2.7.10 Greeting ................................................................................................................................................. 63

2.7.11 Call Progress Tone Plan ........................................................................................................................ 64

2.7.12 Feature Codes (FXS only) ..................................................................................................................... 66

2.7.13 Clock Service ......................................................................................................................................... 68

2.8 Status .................................................................................................................................................................. 71

2.8.1 Call Status Verification............................................................................................................................. 71

2.8.2 Call History on FXS ................................................................................................................................. 72

2.8.3 Call History on FXO (TGW8-2G only) ...................................................................................................... 72

2.8.4 SIP Message Count ................................................................................................................................. 73

2.9 Logs .................................................................................................................................................................... 74

2.9.1 System Status ......................................................................................................................................... 74

2.9.2 Call Message ........................................................................................................................................... 76

2.9.3 System Startup ........................................................................................................................................ 77

2.9.4 Manage Log ............................................................................................................................................. 78

2.10 Tools ................................................................................................................................................................. 80

2.10.1 Change Password ................................................................................................................................. 80

2.10.2 Configuration Management ................................................................................................................... 80

2.10.3 Upgrade ................................................................................................................................................. 82

2.10.4 Restore Factory Settings ....................................................................................................................... 83

2.10.5 Capture Recordings on the Port ............................................................................................................ 84

2.10.6 Ethereal Capture ................................................................................................................................... 84

2.10.7 Network Diagnosis ................................................................................................................................. 85

2.11 Product Information ........................................................................................................................................... 85

2.12 Reboot .............................................................................................................................................................. 85

2.13 Logout ............................................................................................................................................................... 85

3 Aeonix Configuration ................................................................................................................................. 86

3.1 License Requirements ........................................................................................................................................ 86

3.2 FXS Phone Line

– Basic Configuration ............................................................................................................... 87

3.3 FXO Trunk Line

– Basic Configuration (TGW8-2G) ............................................................................................ 90

4 Appendix: Quick Configuration Procedure ............................................................................................. 91

4.1 Gateway Unit Configuration ................................................................................................................................ 91

4.1.1 Basic Configuration ................................................................................................................................. 91

4.1.2 Line Configuration ................................................................................................................................... 95

4.1.3 Routing Table (* Only for Aeonix US ALARMS) ...................................................................................... 98

4.1.4 Advanced Configuration .......................................................................................................................... 99

4.2 Aeonix Configuration ......................................................................................................................................... 103

4.3 Verification ........................................................................................................................................................ 103

Summary of Contents for TGW4 SERIES















































































































































Search results

Summary of Contents for TGW4 SERIES

Reviews:

Brands by name

Popular brands

Tadiran Telecom TGW4 SERIES, User Configuration Manual

Search results

Summary of Contents for TGW4 SERIES

Reviews:

Brands by name

Popular brands