TGW4/8 Gateway Series for Aeonix User Configuration Manual
Tadiran Telecom (TTL) L.P. 35
Name
Description
Configure ring
patterns for ring
cadence 3
Configure ring patterns for ring cadence 3. It is used with
Alert-Info 3
Alert-Info 4
To match with ring cadence 4.
Configure ring
patterns for ring
cadence 4
Configure ring patterns for ring cadence 4. It is used with
Alert-Info 4
.
2.5 FXO Trunk (TGW8-2G)
2.5.1 Phone Number (TGW8-2G)
Only a gateway with FXO ports can display this interface.
After login, click the
Trunk > Phone number
tab to open the Phone number configuration interface.
Figure 2-19
Phone Number Configuration Interface
Table 2-14
Configuration Parameters of FXO Phone Number
Note: * indicates mandatory parameters for Aeonix.
Name
Description
FXO 1st line No.
This number is used for the fast set up of consecutive numbers of trunk lines. Click
Batch
after filling in the initial number, the number of Line 1 adopts the initial
number; that of Line 2 increases 1 progressively based on that of Line 1, and so on.
You do not have to fill in if you do not use batch configuration or the number is not
consecutive.
*
ID n
Fill in the Aeonix trunk number (Alias) associated with the trunk n (FXO port). This
should be manually performed if Batch mode is not used.
(The dial numbers used by Aeonix.)
