Tadiran Telecom TGW4 SERIES, User Configuration Manual

Page: 32 / 142

User Configuration Manual TGW4/8 Gateway Series for Aeonix
20 Tadiran Telecom (TTL) L.P.
Name Description
*
Proxy server
Configure the IP address and port number of the SIP proxy server. The address and port
number are separated by “:”. It has no default value.
The proxy server address can be set to an IP address or a domain name. e.g.
168.33.134.51:5000 or www.sipproxy.com:5000.
When a domain name is used, you must activate DNS service and configure DNS server
parameters on the network-configuration page.
When a domain name is used, you can fill in a backup IP address in
Backup SIP proxy
server in the High Availability configuration. This allows the TGW to failover to the IP
address if the domain name resolution service fails.
For Aeonix

Enter the Aeonix server IP address or name
(ex. 172.28.1.260 or tdd.tad.com).
Subdomain
name This domain name will be used in INVITE messages. If it is not set here, the gateways
will use the IP address or domain name of the proxy server as the user-agent domain
name. It has no default value.
*
Registrar mode
The gateway supports three registration schemes:

Per line (default): authentication and register per line

Per gateway : authentication and register per gateway

Per line/GW auth : Enable registration per line. Use the number configuration per line.
Use the global account and password in authentication
For Aeonix

Select Per line
*
User name
Configure the user name as part of the account for registration. It has no default value.
Note: If
Per gateway or Per line/GW Auth is selected for Registrar mode , the user
name must be entered here. If per line is selected, the user name should be set on “Line >
Feature” page (Refer to
Subscriber Line Features
on page 27).
For Aeonix

In the User name box, enter the Trunk user name.
Use Table 2-8 below as a worksheet to make a list of Trunk User Name/Password.
*
Registrar
password
Password as part of account information is used for authentication by platform. It has no
default value. It is formed with either numbers or characters, and is case sensitive.
Note: If
Per gateway or Per Line/GW Auth is selected for Registrar mode , the
password must be entered here. If Per line is selected, the password should be set on
“Line > Feature” page (Refer to
Subscriber Line Features
on page 27).
For Aeonix

In the Password box, enter the Trunk password.
Use Table 2-8 below as a worksheet to make a list of Trunk User Name/Password.
Registration
expiration Valid time of SIP re-registration in seconds. Its default value is 600 sec.
Table 2-8 below is used in section 3.3 FXO Trunk Line – Basic Configuration (TGW8-2G) on page 90.
Table 2-8
SIP Trunk User name / Password
Name
Enter value (see
User name
and
Registrar password
, above)
Trunk user name
Trunk password