manualshive.com logo in svg

Tadiran Telecom TGW4 SERIES, User Configuration Manual

Share
Download
Tadiran Telecom TGW4 SERIES User Configuration Manual Download Page 70

User Configuration Manual                                                                                                      TGW4/8 Gateway Series for Aeonix 

 

58                                                                                                                                                                Tadiran Telecom (TTL) L.P. 

2.7.7 SIP Related Configuration 

SIP messages consist of request message and response message. Both include a SIP message-header field 

and SIP message-body field. The SIP message header mainly describes the message sender and receiver; 

SIP message body mainly describes the specific implementation method of the dialog. 

Message of request: the SIP message sent by a client to the server, for the purpose of activating the given 
operation, including INVITE, ACK, BYE, CANCEL, OPTION and UPDATE etc. 

Message of response: the SIP message sent by a server to the client as response to the request, including 
1xx, 2xx, 3xx, 4xx, 5xx, and 6xx responses. 

Message header: Call-ID. 

Parameter line: Via, From, To, Contact, Csq, Content-length, Max-forward, Content-type, White Space, 
and SDP etc. 

TGW4S, TGW8-2G and TGW8S-2G gateways provide good flexibility in content setting in order to 
improve compatibility with the SIP register server. 

 

 

 

Summary of Contents for TGW4 SERIES















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands