manualshive.com logo in svg

Tadiran Telecom TGW4 SERIES, User Configuration Manual

Share
Download
Tadiran Telecom TGW4 SERIES User Configuration Manual Download Page 123

TGW4/8 Gateway Series for Aeonix                                                                              High Availability Configuration Guide 

Tadiran Telecom (TTL) L.P.                                                                                                                                                           

111

 

5.2 Automatic Configuration 

5.2.1 Handling Process for Automatically Enabling VLAN

 

Figure 5-14 

System Composition 

 

 

The process consists of the following steps: 

The TGW periodically sends an LLDP message to notify the switch of TGW information. The sending 

interval is modifiable on the GUI interface. See 

 

Table 2-4. 

At the same time, the TGW receives an LLDP message from the switch, and parses the VLAN ID, 

Priority, and DSCP fields. 

 

If the message carries a VLAN ID, the TGW enables the VLAN, adds VLAN information to 

the next messages to be sent, and obtains network information such as IP address via DHCP. 

If the VLAN is also manually enabled on the GUI interface, its VLAN information will be 

replaced by the information that the TGW has obtained from the LLDP message. 

 

If the message does not carry a VLAN ID, the TGW checks whether the VLAN is manually 

enabled. If the VLAN is manually enabled, the TGW uses the VLAN information configured 

manually; otherwise, the TGW enters the non-VLAN communication status.

 

 

Handling Procedure When the LLDP Message Carries a VLAN ID 

The TGW detects whether the LLDP message carries a VLAN ID upon startup only. Once a VLAN ID is 

detected, the TGW enables the VLAN, adds VLAN information to the next messages to be sent, and 

obtains network information such as an IP address via DHCP. The TGW ignores any subsequent LLDP 

message with different VLAN ID. 

 

Figure 5-15 shows the handling procedure. 

Summary of Contents for TGW4 SERIES















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands