Tabor Electronics 5251, User Manual

Page: 38 / 298

2 E
r
r
o
r
!
B
o
o
k
m
a
r
k
n
o
Configuring the Instrument
Installation Overview
2-3
Installation
Overview
This chapter contains information and instructions necessary to
prepare the Model 5251 for operation. Details are provided for initial
inspection, grounding requirements, repackaging instructions for
storage or shipment and installation information.
Unpacking and
Initial Inspection
Unpacking and handling of the generator requires normal
precautions and procedures applicable to handling of sensitive
electronic equipment. The contents of all shipping containers should
be checked for included accessories and certified against the
packing slip to determine that the shipment is complete.
Safety Precautions
The following safety precautions should be observed before using
this product and associated PXI chassis. Although some
instruments and accessories would normally be used with non-
hazardous voltages, there are situations where hazardous
conditions may be present.
This product is intended for use by qualified persons who recognize
shock hazards and are familiar with the safety precautions required
to avoid possible injury. The following sections contain information
and cautions that must be observed to keep the 5251 operating in a
correct and safe condition.
CAUTION
For maximum safety, do not touch the product, test
cables, or any other instrument parts while power is
applied to the circuit under test. ALWAYS remove power
from the entire test system before connecting cables or
jumpers, installing or removing cards from the chassis.
Do not touch any object that could provide a current
path to the common side of the circuit under test or
power line (earth) ground. Always keep your hands dry
while handling the instrument.