TE5251
User Manual
6-26
Input
Impedance:
50
Ω
Range:
100
mV
2. Connect the 5251 output to the Oscilloscope input. Terminate
the 5251output at the Oscilloscope input with the, 50
Ω
, 20 dB
Feed through termination
3. Configure the 5251as follows:
Frequency:
56.0000001
MHz
Output:
On
Adjustment:
1. Adjust CAL:SETUP44 to get the signal of 6 divisions on the
screen.
Setup 45
80 MHz Amplitude, Amplifier Out
Equipment: 50
Ω
, 20 dB Feed through termination, Oscilloscope
Preparation:
1. Configure the Oscilloscope as follows:
Input
Impedance:
50
Ω
Range:
100
mV
2. Connect the 5251 output to the Oscilloscope input. Terminate
the 5251output at the Oscilloscope input with the, 50
Ω
, 20 dB
Feed through termination
3. Configure the 5251as follows:
Frequency:
80
MHz
Output:
On
Adjustment:
1. Adjust CAL:SETUP45 to get the signal of 6 divisions on the
screen.
Setup 46
100 MHz Amplitude, Amplifier Out
Equipment: 50
Ω
, 20 dB Feed through termination, Oscilloscope
Preparation:
1. Configure the Oscilloscope as follows:
Input
Impedance:
50
Ω
Range:
100
mV
2. Connect the 5251 output to the Oscilloscope input. Terminate
the 5251output at the Oscilloscope input with the, 50
Ω
, 20 dB
Feed through termination
3. Configure the 5251as follows:
Frequency:
100
MHz
Output:
On
Adjustment:
1. Adjust CAL:SETUP46 to get the signal of 6 divisions on the
screen.
Summary of Contents for 5251
