Tabor Electronics 5251, User Manual

Page: 108 / 298

TE5251
User Manual
3-56
Insert Section
The insert Section command lets you insert a new section in
between sections that were already designed. Only one new
section can be inserted at the middle of the train. If an empty
section already exists, the insert command will alert for an error.
Delete Section
The Delete Section command lets you remove sections from the
pulse train without affecting the rest of the train. If you use this
command from the Edit menu, make sure that the section you want
to remove is currently the active section.
Remove all Sections
The Remove all Sections command lets you remove the entire
pulse design from the pulse screen and start from a fresh page.
Undo
The Undo command undoes the last editing operation. This
command is extremely useful in cases where you unintentionally
delete a section from the pulse train and want to restore it to the
screen.
View Commands The View commands have commands that let you view various
sections of the pulse area. The View commands include: Pulse
Editor, Full Train or individual Sections and Options. Description of
the view commands is given in the following.
Pulse Editor
The view Pulse Editor command invokes a dialog box as shown in
Figure 3-40. In general, the pulse editor is used for placing straight
line segments on the screen in intervals that define pulse width,
rise/fall times and amplitude. Information how to use the pulse
editor to create pulse trains is given later in this chapter.
Figure 3-40, the Pulse Editor