Tabor Electronics 5251, User Manual

Page: 157 / 298

4
Remote Programming Reference
Standard Waveforms Control Commands
4-23
TRIangle:PHASe<phase>(?)
Description
This command programs start phase of the standard triangular waveform. This command has no affect on
arbitrary waveforms.
Parameters
Name Range Type Default Description
<phase> 0 to 360 Numeric 0 Programs the start phase parameter in units of
degrees. Triangle phase can be programmable with
resolution of 0.1
°
throughout the entire frequency
range of the triangular waveform.
Response
The 5251 will return the present start phase value.
SQUare:DCYCle<duty_cycle>(?)
Description
This command programs duty cycle of the standard square waveform. This command has no affect on
arbitrary waveforms.
Parameters
Name Range Type Default Description
<duty_cycle> 0 to
99.99 Numeric 50 Programs the square wave duty cycle parameter in
units of percent
Response
The 5251 will return the present duty cycle value.
PULSe:DELay<delay>(?)
Description
This command programs delay of the standard pulse waveform. This command has no affect on arbitrary
waveforms.
Parameters
Name Range Type Default Description
<delay> 0 to
99.999 Numeric 10 Programs the pulse delay parameter in units of
percent
Response
The 5251 will return the present pulse delay value.