FLANGING MACHINE
71
F-200
L
DANGER! If the spindle does not rotate evenly or if it stops, interrupt the
work cycle immediately by pressing the EMERGENCY STOP push-button.
8. When the heating operation is finished, the machine carries out the expansion work
cycle until the end. When the work cycle is finished, the spindle stops in the correct
position - ready for the next cycle.
NOTE!
¨
The pipe end is hot after the expansion operation.
9. Loosen the expanded, readily machined pipe and check the measures of the
expansion. If necessary, make corrections in the setting values.
Summary of Contents for F-200
Page 1: ...F 200 FLANGING MACHINE INSTRUCTION MANUAL...
Page 97: ......
