FLANGING MACHINE
35
F-200
14. Install a new forming pin and tighten it with care.
NOTE!
¨
Always use a special washer under the hexagon socket screw.
1. Special washer
6.3.2 THE ADJUSTMENT OF THE TURNING ANGLE OF THE FORMING PIN
The turning angle of forming pin can be adjusted. Use different angle settings for different
forming methods.
Adjustment of the starting and stopping of the flanging /flaring movement of the
forming pin
1. Make sure the adjusting rod of the turning of the forming pin is in a position, where it
easily can be handled. If necessary, turn the spindle into the correct position by pressing
the
push-button.
2. Press the emergency stop button completely down and open the protective hood.
3. Loosen the lock screw of the locking device and turn the adjustment lever. While
turning the lever clockwise the forming pin turns less during the flanging operation and
turning the lever counter-clockwise the forming pin turns longer. Pointer shows 29…31.
1. The hex socket-head screw of the locking unit.
4. When making beveling settings, the adjustment lever has to be turned so, that the
cylinder ends are in the upmost position. Pointer shows to 100.
Summary of Contents for F-200
Page 1: ...F 200 FLANGING MACHINE INSTRUCTION MANUAL...
Page 97: ......
