INSTRUCTION MANUAL
84
Lubricate daily the following points:
1. The bearings of the forming pin.
Lubricate through the grease nipple.
Lubricant: DIN 51825 KP 2K or NLGI 2, EP-
grease, lithium complex, 40°C 190cSt, -20…
+120°C. E.g. Shell Alvania EP2 or equivalent.
2. The guideways of the frame.
Clean the guides with cotton waste and
lubricate through the grease nipples of the
bearing shells with a grease gun.
Lubricant: NLGI 1,5, EP-grease, lithium
complex, viscosity 40°C 550cSt, -20°…+150°C.
E.g. Shell Gadus S3 V550L 1 or equivalent.
3. The slide bearings of the clamping jaws.
Lubricate through the grease nipples with a
grease gun.
Lubricant: NLGI 1,5, EP-grease, lithium
complex, viscosity 40°C 550cSt, -20°…+150°C.
E.g. Shell Gadus S3 V550L 1 or equivalent.
Lubricate every week the following points:
4. The slide
Lubricate with a brush.
Lubricant: NLGI 1,5, EP-grease, lithium
complex, viscosity 40°C 550cSt, -20°…+150°C.
E.g. Shell Gadus S3 V550L 1 or equivalent.
Summary of Contents for F-200
Page 1: ...F 200 FLANGING MACHINE INSTRUCTION MANUAL...
Page 97: ......
