FLANGING MACHINE
51
F-200
Edit the values by touching the fields to open a pop-up keypad. The changes can be saved
on this screen to the library by user level 1 or higher operator.
The modified program can be either saved over the original program which was chosen,
or as a new program, to another memory location. Browse library programs locations
from the arrow buttons or give a number to the right top corner field. NOTE: The new
name for the program must be given in the editing screen!
NOTE!
¨
The value of the “Back pos.” has to be 60mm larger than the value of
the “Start pos.”. For example if the “Start pos.”= 25mm the “Back pos.” has to be
at least 25mm + 60mm= 85mm.
Summary of Contents for F-200
Page 1: ...F 200 FLANGING MACHINE INSTRUCTION MANUAL...
Page 97: ......
