T-Drill F-200, Instruction Manual

Page: 15 / 98

FLANGING MACHINE
15
F-200
4. TRANSPORT, HANDLING AND STORAGE
For transport the F-200 is packed into a wooden case and bolted to its bottom or is bolted
to a wooden base and plastic covered. Weight of the machine is approximately 3150 kg.
For storage the F-200 is to be protected by grease and sufficient dehumidification should
be provided in the storage accommodation. Especially the electric equipment must be
kept dry. The machine can be lifted with a fork lift when attached on the pallet, from
under the pallet.
To remove the machine from the pallet, remove all fixing screws first. The corner plates
have to be removed to reach the screws and adjustable machine feet (adjustment of the
machine feet requires special tools).
To lift the machine, use adequately strong lifting chains. The machine must be lifted from
the lifting eyes, do not use fork lift to lift the machine without the pallet. The lifting eyes
can be removed after the machine is installed.
Before installing the machine, see layout for required space.
Before lifting the F-200 machine:
4
1. Open the hood
2. Fix the lifting
eyes as illustrated
3. Fix a four-part
hoisting chain
NOTE!
¨
Do not use a forklift truck to lift the F-200 without the pallet!