User Manual of SY5000 series AC Drive Keypad operation
~34~
4.2 Basic operation of the keypad
4.2.1 Direct status disply
Direct display status of SY5000 series inverter refers to initial display mode
after power-on, which is used for displaying output frequency of inverter.
4.2.2 Switching of display parameter
In the status of direct display, we can view or modify function parameters by
keypad operations.
All display parameter codes are devided into four groups: basic function
b group, extended function E group, PID regulation function P group and 485
communication R group.
Firstly determine display code of parameters, locat its function group, and
then do operations in the following order.
Figure 4-2 Operation procedure of parameter setting
