User Manual of SY5000 series AC Drive Installation
~13~
2-7(b)), and tighten by using standard No.1 crosshead screwdriver, and tightening
torque is about 5 ~ N • m.
(a) (b)
Figure 2-6 Disassembly and assembly of terminal housing and keypad
(
≥
11 kW)
2. Disassembly and assembly of keypad
(1) Disassembly of keypad
◆
Use standard No.1 crosshead screwdriver to take off four M4 bolts(as shown in
Figure 2-7 (a) );
◆
Disconnect the connection cable of keypad, and remove control panel;
◆
As shown in Figure 2-7 (b), rollover control panel, push out the jaw of keypad,
and remove keypad.
(2) Assembly of keypad
◆
As shown in Figure 2-7 (c), firstly inbed keypad in keypad adapter, and confirm
the correction of inbedding in the slotted hole
；
◆
Connect the connection wire of keypad with control circuitboard;
◆
Fix control panel on the box by using four M4×8 bolts, and tighten by using
standard No.1 crosshead screwdriver, and tightening torque is about 5 ~ N • m.
(a) (b) (c)
Figure 2-7 Disassembly and assembly of keypad (
≥
11kW)
screw hole
screw
hole
clasp
