Suzuki EN125-2A, Service Manual

Page: 79 / 208

3-47 ENGINE
CRANKCASE
Coat SUZUKI SUPER GREASE "A" to the lip of
oil seals.
Remove sealant material on the fitting surfaces
of right and left halves of crankcase and thor-
oughly remove oil stains.
Fit dowel pins on the left half.
Apply engine oil to the big end of the crankshaft
conrod and all parts of the transmission gears.
Apply SUZUKI BOND No.1215 (99000-31110)
uniformly to the fitting surface of the left half of
the crankcase, and after waiting a few minutes,
fit the right half on the left half.
When reassembling the crankcase pay attention
to the following.
After the crankcase bolts have been tightened,
check if driveshaft and countershaft rotate
smoothly.
If a large resistance is felt to rotation, try to free
t h e s h a f t s b y t a p p i n g t h e d r i v e s h a f t o r
countershaft with a plastic hammer as shown in
Fig.
SUPER
GREASE "A"
SUZUKI
SUZUKI BOND
No.1215
99000-25010
99000-31110