Suzuki EN125-2A, Service Manual

Page: 206 / 208

4-2
Remove the clutch unit (Refer to "EN125-2A
SERVICE MANUAL" 99500H06100-01E);
Remove the kick starting idle wheel clip ,
washer and remove kick starting idle wheel
and washer ;
Take out kick starting idle wheel shaft after
separating right and left crankcases;
Dismantling cylinder head and cylinder unit,
piston unit and separating right and left
crankcases (Refer to "EN125-2A SERVICE
MANUAL" 99500H06100-01E).
Remove from inside the right side crankcase
kick starting bush clip , kick starting bush
and kick starting return spring ;
To remove the kick starting return spring, pull
out the part clipped in the axle spring
positioning hole, then remove the hook hanger
clipped in right crankcase hole and take out
spring;
Take out kick starting shaft from outside the
right crankcase.
KICK STARTER