Suzuki EN125-2A, Service Manual

Page: 188 / 208

1-6
BRAKE SHOE
Brake panel incorporate a brake lining wear limit
indicator. If the lining condition is normal, the brake
camshaft index mark line , when extended, will fall
within the range embossed on the brake panel
(when brake is on).
First check that the brake system is properly
adjusted.
Then check the mark extension line; the brake
should be on at this time.
Note:
Replace the brake shoe with a set, otherwise
braking performance will be adversely
affected.
Service limit 1.5mm
BRAKE DRUM
Measure the brake drum I.D. to determine the extent of
wear and, if the limit is exceeded by the wear noted,
replace the drum. The value of this limit is indicated
inside the drum.
Service limit 130.7mm
Inspect the drum I.D. for scratch marks. If the I.D.
surface is scratched or otherwise roughened,
smoothen it by grinding with sandpaper.
FRONT WHEEL AND FRONT BRAKE
If the extended line falls outside the indicated range,
replace the brake shoe assembly.
Check the brake shoe and decide whether it should
be replaced or not from the thickness of the brake
shoe lining.