Suzuki EN125-2A, Service Manual

Page: 192 / 208

2-2
Remove the rear wheel axle nut and remove
rear wheel axle;
Remove the chain from the large sprocket;
Remove the rear wheel;
Flatten the lock washer and screw out the
sprocket nuts;
Remove the sprocket hub and sprocket;
Separate the rear wheel and drive sprocket;
REAR WHEEL AND REAR BRAKE
REAR SPROCKET
Remove the wheel bearings by using the
special tool in the following procedures.
Insert the adapter in to the wheel bearing.
After inserting the wedge bar from opposite
side, lock the wedge bar in the slit of the adapter.
Drive out the wheel bearing by knocking the
wedge bar.
Caution:
The removed bearing should be replaced.
Bearing remover
09941-50110