Sunbeam ALPINE I SERIES: APLINE II SERIES, Workshop Manual

Page: 411 / 413

WSM.124
Section S (Special Tools)
Engine
RG.I0A-7 ....
RG.32-2
RG.89A
RG.90A
RG.155-1
RG.155-4 .. ..
RG.lnA ... .
RG.186
RG.209
RG.225
RG.290
RG.336-1
RG.7600-2
RG.306
RG.336-3 ...
SPECIAL TOOLS
Obtainable from:
V. L. CHURCHILL
&
CO. LTD.
Great South West Road
Bedfont
Feltham
Middlesex, England
Adaptor Set. Use with RG. I0A Valve Guide Remover/Replacer.
Adaptor Set. Use with Camshaft Bush Remover/Replacer 32.
Timing Cover Centraliser.
Distributor Clamping Nut Wrench.
2nd re-Issue
Page I
Adaptor
Adaptor (Crankshaft Pulley, using Parts of RG.155-1).
}
Use with small
adjustable two­
legged Puller 155.
Piston ring compressor. (79mm. bore engine)
Sump Drain Plug Socket (For½" drive).
Camshaft wheel remover
Cylinder Head Nut Crowfoot Wrench (For½" drive extension).
Starter dog wrench.
Adaptor. Use with Con. Rod Jig 335 & Master Arbor 336. (79mm. bore engine)
Adaptor Collelts (2). Use with Flywheel Spigot Bearing Remover 7600.
Piston ring compressor (81 ·5mm. bore engine).
Adaptor. Use with Con. Rod Jig 335 & Master Arbor 336 (81.5 mm. bore engine).
Ring gauges for checking bore measuring gauge are obtainable from Coventry
Gauge and Tool Co. Ltd. Coventry. (3·21 "-1592c.c. engine, 3·11 .. -149"1cc.
engine)
Clutch, Gearbox and overdrive
RG.41 Clutch Plate Centraliser.
RG.62 Selector Shaft Loading Adaptor.
RG.200 Group of Overdrive tools.
L.212 Rear Cover Oil Seal Replacer-Adaptor. (Use with No. 550 Handle).
7065C
Circlip Pliers (Type C points).
Rear Axle
RG.16A-4 .. ..
RG.16A-5 ... .
RG.48
RG.188A-1
RG.188A ....
Axle shaft remover adaptor. Used with main tool RG. I 6A.
Axle shaft remover adaptors (4 legs). Used with main tool RG.16A. (centre
lock hubs).
Bevel pinion flange holding wrench.
Rear hub bearing remover plate and bush. Used with 4 legs RG. I 6A-5 and
RG.188A.
Rear hub remover and securing plate. Used with 4 legs RG. I 6A-5 for centre
lock hubs.