
Page 10
Fl1. 9. Interior door handles
(Rapier)
1. HANDLE, DOOR LOCK
2. ESCUTCHEON
5, HANDLE, WINDOW REGULATOR
6. ESCUTCHEON
3. PIN
7. PIN
-4. RUBBER PAD
8. RUBBER PAD
INTERIOR HANDLES-To remove and refit
Rapier (Fig. 9)
Turn the escutcheon so that the radial groove In
its face Is parallel with the dowel hole In the handle.
Press the escutcheon against the trim panel.
This will also expose the retaining pin.
With an awl, tap out the pin securing the handle to
Its spindle. Remove the handle and its escutcheon
from the spindle.
This operation Is facilitated by a forked
wedge
Inserted between the handle and escutcheon from
the underside
Repeat this procedure with the window regulator
handle.
To refit
Slide the remote control handle escutcheon on to
Its spindle.
Slip the handle on to· Its spindle, matching its
position with the handle on the opposite door.
Insert the pin into the hole In the handle shank,
line up with the pin the groove on the escutcheon,
and push the handle in towards the trim pad
WSM.124
Section O (Body)
When the pin locates with the hole in the spindle,
force it home, and allow the escutcheon to return
over the handle shank.
Repeat the procedure with the window regulator
handle, ensuring that both the windows are in the
same positions before the positions of the regulator
handles are matched.
INTERIOR HANDLES-To
remove and refit
Alpine (Fig. 10)
The procedure for removing and refitting Is the
same as Is given under "Rapier", except that
between the handle and the escutcheon is a cup
and spring.
To remove
Push the cup towards the trim pad, turning while
still pushed in until the end of the han_dle retaining
pin Is exposed.
Tap out the pin, and take off the handle, cup and
spring, followed by the escutcheon.
To refit
Reverse the above procedure.
Fis.
10.
Interior door handles
(A/pine)
I, HANDLE, DOOR LOCK
2. PIN
3, RUBBER PAO
-4. CROWN (CUP
5. SPRING
6. ESCUTCHEON
7. HANDLE, WINDOW REGULATOR
8. PIN
9. RUBBER PAD
10, CROWN (CUP)
I I, SPRING
12. ESCUTCHEON
Summary of Contents for ALPINE I SERIES: APLINE II SERIES
