Sunbeam ALPINE I SERIES: APLINE II SERIES, Workshop Manual, Page: 215 / 413

WSM.124
Section G (Rear Axle)
3rd
re-issue
Page
II
HYPOID BEVEL DRIVE
A
I
B
Fig. 6.
Adjustment of crown wheel and differential box bearinfs.
Note
also the shimming positions
for
pinion adjustment
DIFFERENTIAL UNIT-To adjust and refit
Note
In Flf.
6, the
shim and bearlnf thicknesses
C,
D, and£.
Having carried out the preceding operations, re­
move the differential box bearings (as previously
described) and shims. In their place fit the dummy
bearings without shims, their inner faces abuttJng
the differential box. Place the differential box
assembly (complete with the dummy bearings), in
position in the housing, replace the bearing caps
and lightly tighten the securing nuts. Mount a
dial indicator on the differential housing with