I st re-issue
Pase 8
S. Support the pump spindle end inside the fan
pulley centre as shown in Fig. 4 and press the
lmpellor on to the shaft until the lmpellor is in
the position shown In Fig. 2. It should be noted
that a clearance of .040" (1 ·01 mm.) should exist
between the outer face of the lmpellor and
WSM.124
Section A (Cooling System)
cover plate. This clearance can be checked with
feelers and straight edge as shewn In Fig. 5.
6. Fit cover plate using a new joint and secure with
the countersunk bolt and nut in the uppermost
hole.
Fig. 5.
Checking impel/or clearance
J
Summary of Contents for ALPINE I SERIES: APLINE II SERIES
