WSM. 124
Section E (Gearbox & Overdrive)
Fig. 21,
Fitting first cage
the inner member. The cage is spring-loaded
anti-clockwise when viewed from the front.
Place this assembly, front end downwards, Into the
fitting ring (VLC. L.178) and fit the rollers through
the slots In the tool, turning the clutch clockwise.
Replace the thrust washer and uni-directional
clutch inner member with its rollers, cage and
spring, using tool VLC. 178 to enter the rollers
Into the outer member.
Flt the brass protector ring Into Its groove in front
of the roller clutch assembly. Fit circllp Into recess
to hold the brass ring in position.
Position the gears In the planet carrier by rotating
each planet wheel until the etched line coincides
with the etched line on the planet carrier.
Fig. 22.
Fitting
second
cage
3rd
re-issue
Page 25
Fit the planet carrier, pass the sunwheel splines
into the open ends of the cone clutch member and
fit the small clrclip at the forward end of the
sunwheel.
Press the clutch bearing into the
thrust plate, fit the 4 bolts of the thrust ring and
then fit the clutch bearing assembly into the for
ward end of the cone clutch hub, securing the
assembly In place by the large circllp on the hub.
Flt the clutch assembly complete with sunwheel
into the casing, engaging the sun and planet wheels.
Flt the spacer plate over the bolts of the thrust
ring bearing assembly and fit the 4 springs. Fit the
front casing with the brake ring (large end of the
taper towards the rear casing).
Carefully position the clutch ring bolts, which are
shouldered, through the holes In the front casing.
The clutch spring pressure will now be felt as the
two halves of the casing go together, and it will be
necessary to push the front half towards the rear
Summary of Contents for ALPINE I SERIES: APLINE II SERIES
