Sun Microsystems StorEdge, Troubleshooting Manual

Page: 149 / 168

Appendix C Brocade Communications Systems Error Messages 131
DIAG-LCMEMTX
Err#1F27, 1028
[centralMemoryTest]
Central Memory transmit
path failure: ASIC 1 failed to
read ASIC 2 via the transmit
path mainboard failure Replace mainboard
assembly
DIAG-LCMRS
Err#1F25, 1025
[centralMemoryTest
cmemRetentionTest]
Central Memory Read Short:
M bytes requested but got
less than M bytes ASIC failure Replace mainboard
assembly
DIAG-LCMTO
Err#1F267, 1026
[centralMemoryTest,
cmemRetentionTest]
Central Memory Timeout:
Data transfer initiated, did
not complete within the
timeout period. ASIC failure Replace mainboard
assembly
DIAG-MEMNULL
Err#0112
[ramTest]
Test failed to malloc. mainboard failure Replace mainboard
assembly
DIAG-MEMSZ
Err#0111
[ramTest]
Memory size to be tested is
less than or equal to zero mainboard failure Replace mainboard
assembly
DIAG-MEMORY
Err#0110
[ramTest]
Data read from RAM location
did not match previously-
written data into same
location. CPU RAM failure Replace mainboard
assembly or DRAM
module
DIAG-PORTABSENT
Err#2670, 3070, 3870
[portLoopbackTest,
crossPortTest, spinSilk]
Port is not present ASIC or mainboard
failure Replace mainboard
assembly
DIAG-PORTDIED
Err#265F, 305F, 385F
[portLoopbackTest,
crossPortTest, spinSilk]
Port was in loopback mode
and then went inactive ASIC, SFP module
or fiber cable failure Replace mainboard
assembly, SFP
module, or fiber cable
DIAG-PORTSTOPPED
Err#3874
[spinSilk]
Port is no longer
transmitting, as indicated by
the Number Of Frames
Transmitted counter being
stuck at N frames. ASIC, SFP module,
or fiber cable failure. Replace mainboard
assembly, SFP
module, or fiber cable.
DIAG-PORTWRONG
Err#3078
[crossPortTest]
Frame erroneously received
by port M instead of the
intended port N ASIC failure Replace mainboard
assembly
TABLE C-3
Diagnostic Error Messages (Continued)
Message Description Probable Cause Action