Sun Microsystems StorEdge, Troubleshooting Manual, Page: 80 / 168

62 Sun StorEdge SAN 4.0 Release Field Troubleshooting Guide • October 2002
2. Issue the
luxadm display
command to the affected Sun StorEdge T3+ array LUN.
Refer to the original Storage Automated Diagnostic Environment email alert for the
LUN ID.
The
luxadm display
command output indicates that both paths to the Sun
StorEdge T3+ array LUN are seen again. However, the array is still using the
secondary paths for the I/O data stream (secondary path is ONLINE; primary path
is STANDBY).
# luxadm display /dev/rdsk/c9t60020F20000003D53D349365000C1691d0s2
DEVICE PROPERTIES for disk: /dev/rdsk/c9t60020F20000003D53D349365000C1691d0s2
Status(Port A): O.K.
Status(Port B): O.K.
Vendor: SUN
Product ID: T300
WWN(Node): 50020f20000003c5
WWN(Port A): 50020f23000003d5
WWN(Port B): 50020f23000003c5
Revision: 0201
Serial Num: Unsupported
Unformatted capacity: 51203.250 MBytes
Write Cache: Enabled
Read Cache: Enabled
Minimum prefetch: 0x0
Maximum prefetch: 0x0
Device Type: Disk device
Path(s):
/dev/rdsk/c9t60020F20000003D53D349365000C1691d0s2
/devices/scsi_vhci/ssd@g60020f20000003d53d349365000c1691:c,raw
Controller /devices/pci@1f,2000/SUNW,qlc@1/fp@0,0
Device Address 50020f23000003d5,0
Class primary
State STANDBY
Controller /devices/pci@4,2000/SUNW,qlc@1/fp@0,0
Device Address 50020f23000003c5,0
Class secondary
State ONLINE