Sun Microsystems StorEdge, Troubleshooting Manual

Page: 60 / 168

42 Sun StorEdge SAN 4.0 Release Field Troubleshooting Guide • October 2002
Sun StorEdge Network Fibre Channel Switch-16 counter information can be called
up by using the SANbox Manager application. See the Sun StorEdge Network 2Gb
Switch-16 (SANbox2) Management Manual. This manual can be found with the
following steps.
1. Access the SAN Solutions web site.
http://www.sun.com/products-n-solutions/
hardware/docs/Network_Storage_Solutions/SAN/index.html
The SAN Solutions menu is displayed.
2. Click Other Documentation.
3. Click Sun StorEdge[tm] Network 2Gb Switch-16 (SANbox2) Management Manual.
See Section 4, Managing Ports.
qlctest
Test
If you are running the Storage Automated Diagnostic Environment version 2.1
application, you can also run the Sun StorEdge PCI Dual Fibre Channel Host
Adapter Board Test (
qlctest
) which might increase the following counters if the
test is run while the HBA is connected to the switch:
■
In frames
■
Out frames
■
Link failure
■
Sync losses 100ms
■
Invalid tx words rec
■
LIP total received
■
LIP F7F7
■
LIP F8F7
■
AL Init Attempts
■
Sync Loss
■
LIP during Init