Sun Microsystems StorEdge Troubleshooting Manual Download Page 34

Page: 34 / 168

Sun StorEdge SAN 4.0 Release Field Troubleshooting Guide • October 2002

Software Packages and Patches

You can download software packages or patches with the following procedures.

▼

To generate the most recent patch list for a Sun Solaris
Release

1. Access the SunSolve web site.

http://sunsolve.Sun.COM/

The SUNSOLVE ONLINE menu is displayed.

2. Under SunSolve Contents, click Product Patches.

3. Under Patch Analysis Tools, click PatchPro.

4. Click Solaris Recommended Patch Cluster.

The PATCHPRO Interactive menu is displayed.

5. Select all the appropriate features of your system in the following areas of the

menu:

■

Operating System Release

■

Platform

6. Click Generate Patch List.

▼

To generate the most recent patch list for a specific Sun
StorEdge SAN 4.0 Release Configuration

1. Access the SunSolve web site.

http://sunsolve.Sun.COM/

The SUNSOLVE ONLINE menu is displayed.

2. Under SunSolve Contents, click Product Patches.

3. Under Patch Analysis Tools, click PatchPro.

4. Click Network Storage Products.

The PATCHPRO Interactive menu is displayed.

5. Select all the appropriate features of your system in the following areas of the

menu:

■

OS Release

■

Platform

■

Disk Array

■

Tape Libraries

Summary of Contents for StorEdge









































































































































































Search results

Summary of Contents for StorEdge

Reviews:

Related manuals for StorEdge

Brands by name

Popular brands

Sun Microsystems StorEdge, Troubleshooting Manual

Search results

Summary of Contents for StorEdge

Reviews:

Related manuals for StorEdge

Brands by name

Popular brands