Sun Microsystems StorEdge, Troubleshooting Manual, Page: 160 / 168

142 Sun StorEdge SAN 4.0 Release Field Troubleshooting Guide • October 2002
000100001000010011100100
is broken down as follows:
You can convert these back into usable numbers. Binary -> Decimal (except for
AL_PA, change it to Hex)
From this information, you can conclude the following:
■
The Fabric ID of the switch is 1
■
The Chassis ID of the switch is 2
■
The port in question is port 0 of ASIC 1.
■
Port 0 of ASIC 1 is Port 5, if you were to look at the switch faceplate. (Refer to
TABLE D-1
to see the ASIC/Port breakdown.)
■
The AL_PA of the device is E4.
Knowing this information, you can easily determine where this device is located in
the SAN. See
TABLE D-1
.
0001
Fabric ID
000010
Chassis ID
0001
ASIC ID
00
Port ID
11100100
AL_PA
Fabric ID
1
Chassis ID
2
ASIC ID
1
Port ID
0
AL_PA
E4
TABLE D-1
ASIC and Port Values
Switch Port ASIC ID Port ID
1 0 0
2 0 1
3 0 2
4 0 3