Studer OnAir 1500 Operating Instructions Manual Download Page 285

Page: 285 / 386

OnAir Digital Mixing Consoles

6-66  Configuration

Document generated: 06.08.14

SW V6.0

UserSnapshot: Loading Mic Parameters

Allows user snapshots to temporarily access the microphone preamp param-

eters (high-pass filter, phantom power and gain) of either only local or local

and free remote channels.

Snapshot Location - Remote 

All global and user snapshots may be saved on a

central file server

. This is

a convenient feature whenever a user works on several different consoles

within a network; no matter on which of the networked consoles he is cur-

rently logged in, he has access to his snapshots.

Note:

System requirements for saving snapshots on a central snapshot file server:

• SMB file server

(Windows 2003 Server, Windows Vista and Windows 7 not

supported)

, and

• WINS server must be present within the network.

Snapshot Location 

Selects the location of the snapshots displayed in the user GUI; either Local,

i.e. in the console memory, or Remote, i.e. on the central snapshot file server.

The parameters listed below are displayed in case of

Remote

only.

Remote Share

The share made available by the central snapshot file server is entered here.

Remote Path

(Optional) Entry of the remote path.

Username / Password

For login on the central snapshot file server, the required domain and user

names and password are entered here.

Summary of Contents for OnAir 1500



































































































































































































































































































































































































Search results

Summary of Contents for OnAir 1500

Reviews:

Related manuals for OnAir 1500

Brands by name

Popular brands

Studer OnAir 1500, Operating Instructions Manual

Search results

Summary of Contents for OnAir 1500

Reviews:

Related manuals for OnAir 1500

Brands by name

Popular brands