Studer OnAir 1500, Operating Instructions Manual

Page: 74 / 386

OnAir 1500 Digital Mixing Console
5-18 Operation
Document generated: 06.08.14 SW V6.0
Local View 1 for a Stereo Analogue Line or Digital Input (e.g. USB or AES/EBU) :
Generator
ON/OFF
Phase
Normal/Inv.
Stereo/
Mono
Generator
Routing
Stereo
Mode
CAL
Level
Input Channel Routing *
* Input Channel Routing The local view input channel routing works exactly as described in chapter
5.3.1.1 ‘Global View Operation’.
Generator ON/OFF To switch the test generator ON and OFF; the key is illuminated if ON;
default setting is OFF.
Generator Routing For stereo inputs it can be selected to which channel the generator signal is
routed: To none (
None
), left channel only (
L
), right channel only (
R
) or to
both the left and right channel (
L/R
); default setting:
L/R
.
Phase Normal/Inverted Phase inversion of the left stereo channel signal, except in
RR
Stereo Mode
setting (see below); the key is illuminated if inverted; default setting is
normal.
Stereo/Mono Selects either normal stereo mode or combining the L and R signal to a mono
signal. The key is illuminated if mono; Default setting: stereo.
Stereo Mode Selects left signal-to-left channel/right signal-to-right channel (
LR
), swapped
(
RL
), left signal-to-both channels (
LL
), or right signal-to-both channels (
RR
)
modes; default setting:
LR
CAL (Calibration) Level The input level calibration value can be adjusted from –18 to + 18 dB in
0.5 dB steps; default setting: 0 dB.
Local View 1 for a Mono Digital Input (e.g. MADI) :
Input Channel Routing * Generator
ON/OFF
Phase
Normal/Inverted
CAL
Level
Mono digital inputs have the same functionality as stereo inputs, but without
the stereo mode and mono selectors, as shown above.
Local View 2 for Analogue Line or Digital Inputs:
While this view is available, all displays are blanked; only the selected chan-
nel and its input level meter are displayed.