Studer OnAir 1500 Operating Instructions Manual Download Page 129 | Manualshive

Page: 129 / 386

background image

OnAir 1500 Digital Mixing Console

Operation 5-73

Document generated: 06.08.14

SW V6.0

5.11.4.16 Backup/Restore

Error Code Error Type Error Text / Comment

8700

Warning

BACKUP/RESTORE, Backup Failed! Mandatory configuration file not found ‘config.xml’. No backup cre-

ated.

Appears during backup operation if a mandatory configuration cannot be found.

8701

Warning

BACKUP/RESTORE, Backup Failed! Not enough memory to store backup files. No backup created.

Appears during backup operation if there is not enough memory on the target storage to save all backup

files.

In case where the backup was initiated on an OnAir console, the external storage media is full.

8702

Warning

BACKUP/RESTORE, Backup Failed! Configuration file ‚config.xml ‚ cannot be stored. ‘Error Text’. No

backup created.

Appears during backup operation if the specified file cannot be written to the specified backup location due

to missing access privilege.

8703

Warning

BACKUP/RESTORE, Backup Failed! File transfer from ‘CORE’ interrupted. No backup created.

Appears during backup operation if the file transfer from any source container to the backup target con-

tainer was interrupted by any reason, e.g. container shut down or network interruption.

8704

Warning

BACKUP/RESTORE, Backup Failed! Could not create Backup Directory ‘DirName’. No backup created.
Appears during backup operation if the backup folder could not be created.

8711

Warning

BACKUP/RESTORE, Restore Failed! Not enough memory on the ‘CORE’ file system. Restore aborted.

Appears during restore operation if there is not enough memory to restore backup files to the CF card of

the specified container.

8712

Warning

BACKUP/RESTORE, Restore Failed! Configuration file ‚config.xml ‚ cannot be restored to ‚CORE‘. ‘Error

Text’. Restore aborted.

Appears during restore operation if the specified file cannot be written to CF card of the specified target

container due to one of the following reasons:

- target folder is missing

- access to target folder or file denied

8713

Warning

BACKUP/RESTORE, Restore Failed! File transfer to ‚CORE‘ interrupted. Restore aborted.

Appears during restore operation if the file transfer from the backup source container to any target con-

tainer was interrupted by any reason, e.g. container shut down or network interruption.

8714

Info

BACKUP/RESTORE, Missing configuration file! Mandatory configuration file ‚config.xml ‚ not found. File not

restored to ‹CORE›.

Appears during restore operation if the specified mandatory configuration file cannot be found at the speci-

fied backup location. The restore operation will continue.

8715

Warning

BACKUP/RESTORE, Restore Failed! Trying to restore a backup to the wrong type of Core. Restore

aborted.

Appears during restore operation, if the user tries to restore a CSCore backup to a SCoreLive system or

vice versa.

8721

Warning

BACKUP/RESTORE, Rename Backup Failed! Backup ‘xyz’ not renamed.

Appears during rename operation if access to the backup-folder is denied.

8731

Warning

BACKUP/RESTORE, Delete Backup Failed! Backup ‘xyz’ not deleted.

Appears during delete operation if access to the backup-folder or any file within the backup is denied.

8740

Warning

BACKUP/RESTORE, Reboot is not possible, since there is at least one channel on-air. Please make sure

no channel is on-air and try again.

Appears during reboot operation if at least one channel is on-air.

8750

Info

BACKUP/RESTORE, Please restart core and desk(s) to complete the restore operation.

Appears, after restore operation, of no AutoReboot file exists (manual reboot).

5.11.4.17 Custom Logic

Error Code Error Type Error Text / Comment

8800

Warning

CUSTOM LOGICS, Connection to CORE ‘System71’ lost. Remote GPIO and Custom Logics from that

CORE are not available.

Appears if the CORE looses the network connection to another CORE of a remote system, from which at

least one logical signal is consumed (Remote GPIO or Custom Logics).

«
...
127
128
129
130
131
...
»

Summary of Contents for OnAir 1500



































































































































































































































































































































































































Reviews:

No comments

Related manuals for OnAir 1500

Brand: Oberheim Pages: 40

Brand: CAIRE Pages: 2

Brand: Daga Pages: 24

Brand: DAF Pages: 68

Brand: Datavideo Pages: 48

Brand: Datavideo Pages: 34

Brand: Datavideo Pages: 3

Brand: Datavideo Pages: 34

Brand: Datavideo Pages: 8

Brand: Datavideo Pages: 10

Brand: Pari Pages: 282

i-Digits Access

Brand: Össur Pages: 231

QUICK-ALIGN Vari-Flex

Brand: Össur Pages: 36

Brand: Össur Pages: 2

Brand: Össur Pages: 8

Brand: GAPOSA Pages: 32

Brand: Landoll Pages: 144

Brand: Castellini Pages: 299

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands