Studer OnAir 1500 Operating Instructions Manual Download Page 211

Page: 211 / 386

OnAir 1500 Digital Mixing Console

Operation 5-155

Document generated: 06.08.14

SW V6.0

5.17.5.2

Export/import Labels

The Configuration Tool supports import and export of labels using CSV for-

matted files. A CSV formatted file is an implementation of a delimited text

file, which uses a tab (originally comma) to separate values. Providing such

files allows to easily edit labels in an editor of choice (e.g. Excel).

Export to a CSV formatted file

To export a CSV formatted file, connect to a system in the Configuration Tool

and click the menu “Tools – Export Labels”. The filename for the exported

file is suggested in the format “yymmdd systemname.txt” (e.g. 081022

P2K5_192.txt). Nevertheless any filename of choice can be used. An exported

file looks as follows:

Version:

Route6000 V2.0, build 2

Product:

Route6000

System Name:

Star 6000

Type:

RLogicalInputs

RLI 1

RLI 2

…

384

RLI 384

Type:

RLogicalOutputs

RLO1

RLO2

…

384

RLO384

(Example: Route6000 with 384 RLI and 384 RLO)

Import from a CSV formatted file To import a file click “Tools – Import Labels” and select the file which should

be imported. When importing a file, the labels are assigned according to their

index.

RLI 1

E.g. the label of RLogicalInput1 will be set to RLI 1. For OnAir products all

labels will be truncated to 8 characters. Route6000 labels have an unlimited

string length.

If some labels should not be imported, the index of these labels can be deleted

in the CSV file.

Summary of Contents for OnAir 1500



































































































































































































































































































































































































Search results

Summary of Contents for OnAir 1500

Reviews:

Related manuals for OnAir 1500

Brands by name

Popular brands

Studer OnAir 1500, Operating Instructions Manual

Search results

Summary of Contents for OnAir 1500

Reviews:

Related manuals for OnAir 1500

Brands by name

Popular brands