Studer OnAir 1500 Operating Instructions Manual Download Page 166

Page: 166 / 386

OnAir 1500 Digital Mixing Console

5-110 Operation

Document generated: 06.08.14

SW V6.0

Cue/PFL Also in the configuration tool, the cue mode (alternative to pfl mode) can be

chosen to be “Pre” or “After” VoiceMix processing. For selecting these cue

modes, please see

chapter 6.5.14.

User Access Privilege For access to VMix parameters, privileges may be defined within a policy.

see chapter 5.10.7.

Rotary assign functions VMix assign On/Off as well as the Weight parameter can be configured to be

used on the rotary module - see

chapter 6.5.37.3

Desk_KeyMapping.xml

A global VMix On/Off button can be configured on the desk surface. This is

done in the file

Desk_KeyMapping.xml.

See the table ‘Assignable Global Functions’ in

chapter 6.5.37.4.

On the VoiceMix page, labels and control elements of the VoiceMix process

are displayed.

Clear All

The ‘Clear-All’ button releases all channels previousily assigned to this

VoiceMix process.

‘Clear-All’ also clears assigments of Logical Inputs which are currently not

on a fader.

Underneath it, the number of processed and assigned channels is shown.

Processed :

The number of Logical Inputs currently processed by the VoiceMix process.

Assigned :

The number of Logical Inputs assigned to the Voice Mix process.

This includes also Logical Inputs, which are currently not on a fader.

The ‘On’ button activates the VMix processing.

Response Time

The response can be set from 20ms up to 4s. Recommended setting is 50ms but

the engineer’s ears have to decide. The Response Time cannot be compared

with release- and attack-times of dynamic processes. This time sets how fast

the crossfades between the VoiceMix calculated gain values are executed and

how fast VoiceMix is reacting on the occurring changes of the signals.

Summary of Contents for OnAir 1500



































































































































































































































































































































































































Search results

Summary of Contents for OnAir 1500

Reviews:

Related manuals for OnAir 1500

Brands by name

Popular brands

Studer OnAir 1500, Operating Instructions Manual

Search results

Summary of Contents for OnAir 1500

Reviews:

Related manuals for OnAir 1500

Brands by name

Popular brands