Studer OnAir 1500 Operating Instructions Manual Download Page 226

Page: 226 / 386

OnAir Digital Mixing Consoles

Configuration  6-7

Document generated: 06.08.14

SW V6.0

6.2 Configuration Backup

Backup/restore allows backup and restoring the complete console configura-

tion to or from external media. This consists of the start-up configuration,

the operational initial snapshot, all *.xml and *.ini files. User snapshots are

excluded but can be saved to and restored from external media separately.

Slots for external memory media are provided (

OnAir 3000

: CF card and USB

sockets;

OnAir 1500/2500

: USB socket). If using the remote configuration

tool, the files can be saved at any desired location.

Backup and restore may as well be used for copying configurations between

consoles.

Important

The USB memory device MUST NOT BE REMOVED from the socket

DURING DATA ACCESS – only remove it after its LED has stopped flash-

ing!

Backup

If an external memory medium is inserted, it is displayed in the list (e.g.

USBMedia

). After touching the

Backup

button, the screen keyboard pops

up for giving the backup a name. After touching

Enter

, the configuration files

are copied to the external medium; this takes a few seconds. The

Backup

button is highlighted during the transfer.

Restore

Select the desired configuration file with the rotary encoder below the

Backup 

field and touch

Restore

. After confirmation the configuration data are loaded

into the console’s memory; the

Restore

button is highlighted during the

transfer. Once finished, the console has to be re-booted by touching

Reboot

Rename

To rename backup configuration files on the external medium. If the new

name should already exist, a dialog box appears where overwriting the exist-

ing backup has to be confirmed.

Delete

To delete backup configuration files from the external medium. A dialog box

appears where deleting the selected backup has to be confirmed.

Reboot

Reboots all sub-systems of the selected system, e.g. core, desks and channel

screens of the OnAir 3000. A dialog box appears where rebooting the current

system has to be confirmed. If at least one channel should be on-air, the reboot

is not executed but a user warning appears in such a case.

Summary of Contents for OnAir 1500



































































































































































































































































































































































































Search results

Summary of Contents for OnAir 1500

Reviews:

Related manuals for OnAir 1500

Brands by name

Popular brands

Studer OnAir 1500, Operating Instructions Manual

Search results

Summary of Contents for OnAir 1500

Reviews:

Related manuals for OnAir 1500

Brands by name

Popular brands