Studer OnAir 1500, Operating Instructions Manual

Page: 216 / 386

OnAir 1500 Digital Mixing Console
5-160 Operation
Document generated: 06.08.14 SW V6.0
Reboot Reboots all WinCE subsystems of the selected system. E.g. Core, Desks and
ChannelScreens of an OnAir3000.
Note : Rebooting a console is only possible if none of the channels are on-air !
5.17.5.6 Create Login File
Create Login File allows the creation of login files which are used for login
with a USB memory stick.
Create a Login USB Stick
Important
!
Not all USB sticks are recognized by the system if plugged in before or during
start-up. The USB stick shipped with the console has been tested for start-up
recognition; it is recommended therefor that this stick is used for login.
If two login USB sticks are connected to the console, the last one ‘wins’.
A USB stick intended for user login must contain a file named
Login.ID
.
Normally this file is created by the system administrator; he must use the
Remote Config Tool to do so.
1
Start the Remote Config Tool and select the system as outlined in chapter
5.17.4 . The configuration window opens.
2 Expand the User item in the configuration menu tree by a click on the
‘ + ’ button next to the item and click on Users .
3 Create a new user (name and password) and activate him by entering On
in the User Valid field. The user name created in our example is FLO ,
his password is Ferro . Please remember that user names and passwords
are case-sensitive, both when creating and using them.
4
Save the new user by clicking the Save User button at the right edge
of the window. The user must be created on every system that he will use.
5 Select Tools from the menu bar and select Create Login File... , as
shown below.
6 The Login File window pops up; select the new user from the User:
dropdown menu: