Studer OnAir 1500, Operating Instructions Manual

Page: 124 / 386

OnAir 1500 Digital Mixing Console
5-68 Operation
Document generated: 06.08.14 SW V6.0
Error Code Error Type Error Text / Comment
4215 Warning
CONFIG, Insert “PCM 90” de-assigned from input “DVD 5.1”, since the format of the input has been
changed to 5.1.
Appears when changing the format of a logical input from mono or stereo to 5.1 in the Config GUI if the
logical input has an insert assigned.
4216 Warning
CONFIG, Reset ‘EQ’ of channel channel ‘2’ on ‘Container100’ is pending. Input ‘Digi1’ is on-air.
Appears if an audio reset operation can’t be executed directly since the according input is on-air. The reset
remains pending until the input goes off-air.
4300 Warning SYSTEM, Logon failed: Wrong user name or password.
4301 Warning
USER, User name is already in use. The user name has to be unique.
Appears when the same username is used twice, or when a user with a username that already exists
becomes valid.
4302 Warning
SYSTEM, No Policy defined. User ‘John’ logged in, but all access denied.
Appears during Login if no policy is defined for the user.
4303 Warning
SYSTEM, One or more policies missing. User ‘John’ logged in, but access privileges may be reduced.
Appears during Login if one of the specified policies for that user is not available (missing in the tree).
4400 Warning
DESK, Mic Control Access to input “Mic 1” no longer provided. Desk “PRI DESK” of System “SR-3” has
gained access.
Appears when access to microphone card parameters is passed to another DeskContainer.
(Request with confirmation).
4500
Warning
CONFIG, The CODEC return line of input ‘Codec1’ is no longer connected to ‘Cent 04’ of system ‘P422’.
Appears if the return line of a codec input has been reconnected to any other source except 0 (e.g. recon-
necting the return line to a different user’s codec input).
4601 Warning
CONFIG GUI, Could not open file ‘D:\Temp\081104‘ for reading.
Appears if the selected file for label import may not be opened.
5.11.4.8 Snapshot Handling
Error Code Error Type Error Text / Comment
5000 Warning
SNAPSHOT, Snapshot File ‘myFirstSnap’ not found or invalid! Snapshot not loaded.
Appears if the snapshot extension cannot open a user snapshot file (.aud/.irt/.ort/.ass). This may be the
case when trying to load a global snapshot from a desk key or by a GPInput. It may also be the case when
loading a user snapshot from within the snapshot page.
User Warning 5000 appears only on the particular desk (primary or secondary) that either loads the snap-
shot or is specified in Argument 2 of a GPInput.
Note: Initial Snapshots and Default Snapshot of any user are optional and will not trigger User Warning
5000.
5001 Warning
SNAPSHOT, Snapshot recall incomplete. Audio parameters of channel ‚2‘ on ‚Container100‘ are pending.
Input ‘Digi1’ is on-air.
5002 Warning
SNAPSHOT, Snapshot cannot be loaded. Incompatible snapshot file version ‘myFirstSnap’.
Appears if the snapshot extension cannot open a user snapshot file (.aud/.irt/.ort/.ass) because of the
wrong snapshot version.
5003 Warning
SNAPSHOT, Snapshot File ‘myFirstSnap’ corrupted!
Appears if the snapshot extension cannot open a user snapshot file (.aud/.irt/.ort/.ass) because of CRC
check fails.
5004 Warning
SNAPSHOT, Snapshot files cannot be created. Not enough memory on the ‘CORE’ file system!
Appears (with the according container name e.g. ‘CORE’) if there is not enough memory for one of the fol-
lowing operations:
- save user snapshots (Snapshot::Shot page ‘<<’ button)
- transfer snapshots from external media to the console (Snapshot::EXT page ‘<<’ button)
5005 Warning
SNAPSHOT, Snapshot files cannot be transferred. Not enough memory on external storage media!
Appears if there is not enough external storage memory for one of the following operations:
- transfer initial snapshots from the console to external media (Admin::Config page ‘Save’ button)
- transfer user snapshots from the console to external media (Snapshot::EXT page ‘>>’ button)