Studer OnAir 1500 Operating Instructions Manual Download Page 117

Page: 117 / 386

OnAir 1500 Digital Mixing Console

Operation 5-61

Document generated: 06.08.14

SW V6.0

Error Code Error Type Error Text / Comment (SCL: SCore Live; CSC: Compact SCore)

2202

Info

CORE DRIVER, DSP card in slot 1 detected. Please make sure, the CORE is rebooted in order to achieve

system consistency.

Appears during runtime (not during power-up) when the user inserts a DSP card in a slot that was empty at

power-up.

2400

Error

CORE DRIVER, No communication to CORE.

Appears during power-up if the Bridge card does not respond to eGetCore or if it responds with eGetCor-

eFailure.

2403

Error

CORE DRIVER, DSP Card in slot 1 failed! Card has been reset.

Appears during runtime if a DSP card with I/O fails (the watchdog of the VDCA detects a failure of one of

the DSPs) but the functionality can be re-established by resetting the card (the Bridge Card tries to reset a

DSP Card up to 3 times). (eFailedIoDspCardResetted)

2404

Error

CORE DRIVER, DSP Card in slot 1 failed! Code reloaded to redundant card in slot 6. Connect HD Link

cables of DSP slot 1 to DSP slot 6!

Appears during runtime if a DSP card with I/O fails (the watchdog of the VDCA detects a failure of one of

the DSPs) after a DSP card was previously reset once. The tasks will be migrated to a redundant DSP card

that was not reset before. (eFailedIoDspCardLoadedTo)

2405

Error

CORE DRIVER, Communication to CORE lost.

Appears during runtime if no ‘heartbeat’ has been received from the Bridge Card for more than 5 seconds.

2406

Info

CORE DRIVER, Bridge Card firmware was downloaded. This will take effect after next restart of Core.

Appears during runtime if the Bridge Card firmware was downloaded.

5.11.4.3

USB Recorder/Player

Error Code Error Type Error Text / Comment

2800

Warning

USB RECORDER, No communication to USB Recorder/Player subsystem.

No Recorder/Player function available.

Appears during power-up, if the ArchWave subsystem doesn’t respond to the DeviceStatusRequest or the

VersionRequest.

An USB stick shall be removed and console must be restarted to re-establish communication to the USB

Recorder/Player subsystem.

2801

Warning

USB RECORDER, Communication to USB Recorder/Player subsystem lost.

No Recorder/Player function available.

Appears during runtime, if the alive mechanism of the host software for the serial communication to the

ArchWave subsystem fails.

An USB stick shall be removed and console must be restarted to re-establish communication to the USB

Recorder/Player subsystem.

2802

Warning

USB RECORDER, Session closed by the USB Recorder/Player subsystem.

No Recorder/Player function available.

Appears during runtime, if the alive mechanism of the ArchWave subsystem for the serial communication

fails.

An USB stick shall be removed and console must be restarted to re-establish communication to the USB

Recorder/Player subsystem.

2803

Warning

USB RECORDER, Firmware download failed.

No Recorder/Player function available.

Appears during start-up if the new firmware cannot be downloaded due to the download was interrupted for

any reason or incompatible file format.

An USB stick shall be removed and console must be restarted to re-download firmware to the USB

Recorder/Player subsystem.

2804

Info

USB RECORDER, Firmware successfully downloaded.

Recorder/Player functions are now available.

Appears during start-up if the new firmware could be downloaded successfully.

2805

Warning

USB RECORDER, The firmware file is missing or corrupt.

No Recorder/Player function available.

Appears during start-up if the firmware file cannot be downloaded due to

-the DM1500.bcd-firmware file is missing

-the DM1500.bcd-firmware file doesn’t contain a valid firmware version.

Summary of Contents for OnAir 1500



































































































































































































































































































































































































Search results

Summary of Contents for OnAir 1500

Reviews:

Related manuals for OnAir 1500

Brands by name

Popular brands

Studer OnAir 1500, Operating Instructions Manual

Search results

Summary of Contents for OnAir 1500

Reviews:

Related manuals for OnAir 1500

Brands by name

Popular brands